Giga-byte: GA-G31M-ES2L (rev 2.0)
| PCI ID | Works? | Vendor | Device | Driver | Kernel |
| 808629c0 | Yes | Intel Corporation | 82G33/G31/P35/P31 Express DRAM Controller | intel-agp | |
| 808629c2 | Yes | Intel Corporation | 82G33/G31 Express Integrated Graphics Controller | i915 | v2.6.32- |
| 808627d8 | Yes | Intel Corporation | N10/ICH 7 Family High Definition Audio Controller | snd-hda-intel | |
| 808627d0 | | Intel Corporation | N10/ICH 7 Family PCI Express Port 1 | | |
| 808627d2 | | Intel Corporation | N10/ICH 7 Family PCI Express Port 2 | | |
| 808627c8 | | Intel Corporation | N10/ICH 7 Family USB UHCI Controller #1 | | |
| 808627c9 | | Intel Corporation | N10/ICH 7 Family USB UHCI Controller #2 | | |
| 808627ca | | Intel Corporation | N10/ICH 7 Family USB UHCI Controller #3 | | |
| 808627cb | | Intel Corporation | N10/ICH 7 Family USB UHCI Controller #4 | | |
| 808627cc | | Intel Corporation | N10/ICH 7 Family USB2 EHCI Controller | | |
| 8086244e | Yes | Intel Corporation | 82801 PCI Bridge | i810_rng | |
| 808627b8 | Yes | Intel Corporation | 82801GB/GR (ICH7 Family) LPC Interface Bridge | leds-ss4200,intel-rng,iTCO_wdt | v2.6.25- |
| 808627df | Yes | Intel Corporation | 82801G (ICH7 Family) IDE Controller | ata_piix | v2.6.25- |
| 808627c0 | Yes | Intel Corporation | N10/ICH7 Family SATA IDE Controller | ata_piix | v2.6.25- |
| 808627da | Yes | Intel Corporation | N10/ICH 7 Family SMBus Controller | i2c-i801 | v2.6.25- |
| 19691063 | Yes | Atheros Communications | AR8131 Gigabit Ethernet | atl1c | v2.6.29- |
| 11c15811 | Yes | Agere Systems | FW322/323 | ohci1394 | |
| 10ec8139 | Yes | Realtek Semiconductor Co., Ltd. | RTL-8139/8139C/8139C+ | 8139cp,8139too | v2.6.25- |
19691063 usualy (also) works with driver AR81Family-Linux-v1.0.1.9.tar.gz http://partner.atheros.com/Drivers.aspx
808629c2 82G33/G31 Express Integrated Graphics Controller usually needs mesa for hw accelerated 3D operation ,may be slower sometimes. page flip from 2.6.32 or .33 and dri2 ?
try : export INTEL_BATCH=1 (now obsolited?)
808629c0 without intel-agp you may only boot x-server in VESA mode
coretemp.ko driver for measuring temperatures , need 2.6.25 for recent wolfdale CPU
it87 for sensors board has it8718 see lm-sensors for support info
* most stuff should actualy work from kernels 2.6.24 up
* the board may have strange instability isues.or may not.
have fun! (2010-04-28 20:53:17)
|